CTD Calibration Course

 

Application Notes
Application Notes

ADCP USED IN BERTH MANAGEMENT SYSTEMS

One of Strainstall UK Limited’s primary marine safety systems is their Berth Management System, which is used chiefly for the docking of VLCCs (oil tankers) and LNG (liquid natural gas) carriers. The Berth Management System provides assistance to vessels on their approach to the berth and during mooring by monitoring the conditions of the sea and surrounding area to ensure the complete safety of the vessel.  The system undertakes continuous surveillance of the mooring and vessel related parameters, such as speed and position of the vessel on approach, weather conditions and oceanographic parameters.

 

An example of a berth vessel
An example of a berth vessel

 

A system such as Strainstall’s needs to be in place to ensure that the docking operation is performed within defined environmental limits and strict approach speed limits, as large impact on the fenders and jetty equipment may cause considerable damage.  In relation to this, environmental monitoring of parameters such as current and tides needs to be undertaken as the conditions will affect the manoeuvring of the ship during berthing.

 

Strainstall use SonTek’s Argonaut-SL sideways facing ADCP in their Berth Management Systems to monitor the current present at the time of berthing.  SonTek recognised the need to measure water velocity and level in open channels during applications such as this and the SL was their solution.  The SL, known as the Side-Looker, is intended for side mounting on bridges, canal walls and riverbanks, ideally on an existing structure.  It is available in three models all with different sampling ranges, the SL3000’s being 0.1m - 5m, the SL1500 0.2m - 20m and the SL500 reaching up to 120m.  The assortment of ranges mean that the SL is suited to a variety of channels from narrow rivers to wide ports.

 

The Argonaut-SL range

The Argonaut-SL range
 

The Argonaut-SL’s narrow beam width, combined with unmatched side lobe suppression, provides the superior acoustic directivity necessary for achieving maximum horizontal range, which is free of interference from boundaries and obstacles.  The SL comes with the Windows software packages ViewArgonaut and FlowPack, but it is also compatible with other software, which Strainstall illustrates by using it with their Berth Management software. 

 

The right position for the Argonaunt-SL needs to be ascertained for each Berth Management System set up by Strainstall so that sufficient data can be provided.  To achieve the most accurate results in this application, Strainstall considered the installation, survivability, maintenance and cost constraints of the SL and deduced that the berth itself would be the most appropriate structure for the sensor.  From this position the SL can monitor the current as the vessel is approaching the berth which is the primary operational requirement and when current measurement is most critical.

 

Within the berth, Strainstall must also take practical restraints into consideration.  The mooring dolphins can have an affect on the water flow into the berth and, therefore, can affect the data recorded.  From this Strainstall have deduced that whenever possible the SL should be deployed from a catwalk, which is a walkway that links the mooring dolphins.  To install an Argonaut-SL onto a catwalk a deployment frame or support is needed which must be designed to suit the structural design of the catwalk, allowing for easy deployment and recovery.  The frame will need to be light enough so that it can be lifted for cleaning and be stiff enough to avoid vibration in strong currents.

 

A typical deployment frame
A typical deployment frame

 

If deploying the SL on a catwalk the signal cable can be routed to a junction box on the catwalk which is then connected to a central control room via fixed site cabling.  A PC is located in the control room running Strainstall’s Berth Management software which integrates the SL’s data with the other measured parameters.

 

An example of the SL in use
An example of the SL in use

 

Mr Dave Vodden, Engineering Manager at Strainstall, explains that the Argonaut-SL was chosen because, “being an ADCP, marine fouling is far less of a problem than with impellor type current meters.”  This means that time can be saved by only having to clean the instrument every three months.

 

For further information on the Argonaut-SL please contact:

OSIL
Culkin House
C8 Endeavour Business Park
Penner Road
Havant
Hampshire
PO9 1QN
Tel: +44 (0)2392 488 240
Fax: +44 (0)2392 488 241
Email: osil@osil.co.uk
Web: www.osil.co.uk

 

Print this Article

Hosted by UK Fast Login